GoLogic DM3141 dijital multimetre, gerilim, akım, frekans, güç faktörü, güç ve enerji ölçümü, LED ekran,Class 1.0, RS485 haberleşme portlu
METSEGLDM3141
Bu dijital panel metre, GoLogic Panel Metre Serisinin bir parçasıdır.
- Pano, motor ve dağıtım panosunda temel elektrik parametrelerinin ölçümü
- Dengesizlik, güç faktörü ve faz açısı ile şebeke ölçümü
- Anlık parametreler için 8 segmentli alfanümerik LED ekran
- Kurcalamayı önlemek için parola ve iletişimi devre dışı bırakmak için siber güvenlik
Diğer enerji ölçüm ekipmanlarından enerji analizörleri ürünlerini görüntülemek için buraya tıklayabilirsiniz.
Mas Otomasyon hakkında daha fazla bilgi almak için buraya tıklayabilirsiniz.
Stokta yok
| Main | |
| Range | Go Series |
| Product name | GoLogic DM3000 |
| Device short name | GLDM3140 LED |
| Product or component type | VAF PF meter |
| Complementary | |
| Device application | Remote monitoring Motor control Power distribution Building management system Energy monitoring |
| Type of measurement | Current Voltage Frequency RPM |
| Metering type | Unbalance current Calculated neutral current Unbalance voltage Rotation speed Phase currents Voltage U21, U32, U13, V1, V2, V3 Frequency Average voltage Vavg Average current Iavg Power factor |
| Counter functions | Power interruption ON hour counting |
| [Us] rated supply voltage | 48…277 V AC 45…65 Hz 48…277 V DC |
| Network frequency | 50 Hz 60 Hz |
| [In] rated current | 1 A 5 A |
| type of network | 2P + N 2P 3P + N 3P 1P + N |
| Maximum power consumption in VA | 4 VA at 240 V between phase and neutral |
| Maximum power consumption in W | 2 W at 240 V |
| Display type | 8 segments LED |
| Display colour | Red |
| Messages display capacity | 3 fields of 4 characters |
| Display digits | 12 digit(s) – 14.2 mm in height |
| Communication of data | Reading of measurements Instantaneous and demand values Revolution speed All counters |
| Tamperproof of settings | Protected by access code |
| Sampling rate | 32 samples/cycle |
| Measurement current | 10…6000 mA |
| Signal | Current 0.005…10 A (impedance 0.3 MOhm)6 x |
| Measurement voltage | 80…480 V AC 50…60 Hz between phases 46…277 V AC 50…60 Hz between phase and neutral 100…999000 V AC 50…60 Hz with external VT 35…600 V AC 50…60 Hz full voltage range |
| Frequency measurement range | 48…52 Hz 58…62 Hz |
| Measurement accuracy | Active energy +/- 1 % Reactive energy +/- 2 % Apparent energy +/- 1 % Active power +/- 1 % Reactive power +/- 1 % Apparent power +/- 1 % Current +/- 0.5 % Voltage +/- 0.5 % Frequency +/- 0.05 % 48…52 Hz / 58…62 Hz Frequency +/- 0.2 % 30…70 Hz Power factor +/- 0.01 Harmonic distortion (I THD & U THD) +/- 5 % |
| Accuracy class | Class 1 active energy conforming to IEC 62053-21 Class 2 reactive energy conforming to IEC 62053-23 Class 1 apparent energy Class 1 active power Class 1 reactive power Class 1 apparent power Class 1 current Class 1 voltage Class 1 power factor Class 5 harmonic distortion (I THD & U THD) |
| Demand intervals | 1 s |
| Local signalling | Green LED: activity Green LED: communication 1…9999000 pulse/ k_h (kWh, kVAh, kVARh) |
| Communication port protocol | Modbus RTU at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none – 2-wire, insulation 2500 V |
| Communication port support | Screw terminal: RS485 |
| Material | Polycarbonate |
| Flame retardance | V-0 conforming to UL 94 |
| Mounting mode | Flush-mounted |
| Mounting support | Framework |
| Installation category | III |
| Type of installation | Indoor installation |
| Measurement category | Category III 80…480 V |
| Electrical insulation class | Class II |
| Connections – terminals | Current circuit: screw clamp terminals (bottom) 2.08…3.31 mm² cable(s) Voltage circuit: screw clamp terminals (top) 0.82…3.31 mm² cable(s) Control circuit: screw clamp terminals (top) 0.82…3.31 mm² cable(s) Communication: screw clamp terminals (bottom) 0.33…3.31 mm² cable(s) |
| Tightening torque | Current circuit: 0.9…1 N.m Philips No 2 screwdriver Voltage circuit: 0.9…1 N.m Philips No 2 screwdriver Control circuit: 0.9…1 N.m Philips No 2 screwdriver Communication: 0.5…0.6 N.m Philips no 1 screwdriver |
| Wire stripping length | Current circuit: 3.68 mm Voltage circuit: 7 mm Control circuit: 7 mm Communication: 7 mm |
| Standards | IEC 61010-1:ed. 3 UL 61010-1:ed. 3 |
| Product certifications | CE conforming to IEC 61010-1 CULus conforming to UL 61010-1 CULus conforming to CSA C22.2 No 61010-1 RCM EAC |
| Width | 96 mm |
| Depth | Outside : 13.9 mm Panel : 48.8 mm |
| Height | 96 mm |
| Net weight | 300 g |
| Environment | |
| Electromagnetic compatibility | Electrostatic discharge conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 Surge immunity test conforming to IEC 61000-4-5 Conducted RF disturbances conforming to IEC 61000-4-6 Magnetic field at power frequency conforming to IEC 61000-4-8 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 Emission tests conforming to FCC part 15 class A Emission tests conforming to FCC part 15 Subpart C Emission tests conforming to FCC part 15 Subpart E |
| Overvoltage category | III |
| IP degree of protection | IP51 front: conforming to IEC 60529 IP30 body: conforming to IEC 60529 |
| Relative humidity | 5…95 % at 50 °C |
| Pollution degree | 2 |
| Ambient air temperature for operation | -10…60 °C |
| Ambient air temperature for storage | -20…70 °C |
| Operating altitude | <= 2000 m |
| service life | 7 year(s) |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.905 cm |
| Package 1 Width | 11.903 cm |
| Package 1 Length | 12.229 cm |
| Package 1 Weight | 360 g |
İlgili ürünler
Enerji Ölçüm Ekipmanları
A9XMSB11 Acti9 Smartlink – Modbus RS485 slave – akıllı haberleşme G/Ç modülü
Elektrik Sayaçları
A9MEM3255 (Schneider Elektrik) Ray Tipi Elektrik Sayacı-X/5 Akım Trafosu Girişi – RS485
€ 127,00 + KDV